![]() If your battery is dead, replace it before you proceed with other repairs. Hint: If you look at the gear selector on your instrument cluster, and it doesn’t display the current shifter position, such as P, R, N, and D, it is a good indication that the shifter module is defective.īattery One common reason for the shifter not getting out of the park is low battery voltage or dead battery. In this case, you will need to manually get the car out of park until you get the part replaced. Plastic parts inside the shifter can break. The shift interlock solenoid, which is located inside the shifter assembly, can fail or quit working. Gear Shifter Assembly The shifter assembly (gear shift module) may fail due to wear or internal failure. Read this article on How to replace the brake light switch on a Mercedes-Benz. This is an indication that the brake light switch may need to be replaced. A common symptom when the brake light switch fails, and you can’t get the car out of the park is that the ESP, ABS, or BAS lights will also turn on. This is not a good test to troubleshoot whether the brake light switch is working. You may be tempted to check if the brake lights are working to confirm whether the brake light switch is working. Therefore, it will get stuck in the park. Once the brake light switch stops working properly, the shifter doesn’t know if you are pressing the brake pedal or not. The shifter will not be released unless you press the brake pedal, which is proper operation, as required by Federal Law. Once you confirm the battery is fully charged, the two most common problems are a defective brake light switch or a shifter module being damaged.īrake Light Switch Brake light switche fail very frequently and are the most common cause of transmission stuck in Park problem. ![]() If the shifter on your Mercedes-Benz will not move out of the park, you should first check the battery. Transmission Shift Cable Broken or Shift Rod Bent / Loose.Faulty Engine Control Unit (ECU) or Transmission Control Unit (TCU).Here is a list of the most common reasons why the gear selector does not move out or Park. Turn the ignition to Position, I, II, or Run.The interlock mechanism will allow the shifter to move out of PARK when both of these conditions are met: If you need to move the shifter out of Park and into Drive, you need to reinsert the key into the ignition and turn it to position I or II. This safety feature locks the shifter in Park when you turn off the ignition. Mercedes-Benz cars that are equipped with automatic transmissions have a gear selector shifter interlock safety feature. P, N, R, and D gear selection indicators on the dashboard do not display the correct gear.The shifter can not be returned to Park (P), and you can’t remove the key from the ignition.Mercedes will start, but the transmission won’t go into gear.Mercedes E, S, C, ML-Class gear shift stuck in park.Mercedes transmission won’t go into drive.Stuck in D, R, and N and will not move back to Park (P).Mercedes is stuck in Park (P)and refuses to go to D or N.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |